Woodridge, IL - Installation using a 25 ton, Air-Cooled, Trailer Mount Unit

During the onset of Covid, an electronic manufacturing facility was in dire need of cooling inside their production area. Porta-Air was phoned and immediately provided a free onsite assessment. The proposal was approved, and our team installed a 25-ton rental unit. A few hundred feet of ductwork was installed inside the building, directing the cold air where it was needed.

Read more

Lombard, IL – Office Space 5-ton Portable Unit Purchase

A good customer in a commercial building in Dupage County, IL requested a MovinCool Office Pro 60 for an area in their building where the tenant was overwhelmed with unpleasant temperatures in the summertime. Once the nominal 220V, single phase electrical outlet was installed, our technician completed the portable air chiller install by ducting the condenser air to the plenum ceiling and running the condensate line horizontally above the drop ceiling to a water drain.

Read more

Bolingbrook, IL - Temporary Office Cooler Installation Inside Warehouse

A couple of portable AC units were installed inside a temporary office space which was inside a large warehouse building. The portable air rental units were onsite for the entire summer season at competitive rental rates. The employees were delighted when Porta-Air finished the installation. The hot air picked-up from the room was rejected through the white duct into the enormous warehouse.

Read more

Lincolnshire, IL - Lake County Portable Air Rental Unit for Server Room Application

When the Mini-Split inside the server room failed, Porta-Air received a call to install a portable spot cooling unit, Office Pro 18 to overcome the heat load being generated by the servers. The air conditioning rental unit was installed using a condensate pump, where the pump condensate line was run 9 feet vertically and 100 feet horizontally above the ceiling to the water drain. A condensate pump was necessary so the unit would provide cooling continuously, 24/7. If a condensate bucket were used, in place of the pump, it would fill-up quickly with condensate and disable the compressor, thus no cooling.

Read more